| Customization: | Available |
|---|---|
| Classification: | High-Alumina |
| Feature: | Good Mechanical Strength, High-Temperature Resistant |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Strength Refractory Precast Block for Coke Oven
Product Introduction of Precast Refractory Block:
The pre-cast refractory block is made of composite ceramic material. Pre-cast refractory is shaped by high frequency vibration. The unformed material has low porosity, high density and good uniformity. There is crystalline ceramic refractory adhere the pre-cast surface, which have high strength, good abrasion resistance and corrosion resistance. It has been reduced the physical damage during the operation and tar and other chemicals erosion to the refractory.
Pictures of Product
Technical Data
| Item | Pre-cast Coke Door |
| ω(Al2O3) / % ≥ | 50 |
| ω(MgO) /% ≥ | 3 |
| Apparent Porosity / % ≤ | 28 |
| Bulk Density /g/cm3 ≥ | 2.1 |
| Cold Crushing Strength / MPa ≥ | 35 |
| Rupture Strength /MPa ≥ | 4 |
| Thermal Conductivity /W/(m·K)1000ºC (Heating side) ≤ | 1.2 |
| Thermal Shock Resistance(1100ºC, water cooling) /cycle ≥ | 50 |
| Item | Glazed Coal-charging Hole & Bell Pre-cast Refractory |
| ω(Al2O3) /% ≥ | 45 |
| ω(MgO) / % ≥ | 2.5 |
| Apparent Porosity / % ≤ | 28 |
| Bulk Density /g/cm3 ≥ | 2.1 |
| Cold Crushing Strength / MPa ≥ | 40 |
| Rupture Strength / MPa ≥ | 4 |
| Thermal Conductivity/W/(m·K)1000ºC (Heating side) ≤ | 1.2 |
| Thermal Shock Resistance (1100ºC, water cooling) /cycle ≥ | 50 |
| Item | Normal Coal-charging Hole & Bell Pre-cast Refractory | |
| ω(Al2O3) /% ≥ | 45 | |
| ω(MgO) / % ≥ | 2.5 | |
| Apparent Porosity /% ≤ | 28 | |
| Bulk Density / g/cm3 ≥ | 2.1 | |
| Cold Crushing Strength /MPa ≥ | 110ºC*24h After drying | 35 |
| 1350ºC*3h After firing | 40 | |
| Rupture Strength /MPa ≥ | 110ºC*24h After drying | 3 |
| 1350ºC*3h After firing | 4 | |
| Thermal Conductivity/W/(m·K)1000ºC (Heating side) ≤ | 1.2 | |
| Thermal Shock Resistance (1100ºC, water cooling) / cycle ≥ | 50 | |
| Item | Glazed Ascending Pipe Pre-cast Refractory |
| ω(Al2O3) /% ≥ | 50 |
| ω(MgO) / % ≥ | 2.5 |
| Apparent Porosity /% ≤ | 28 |
| Bulk Density /g/ cm3 ≥ | 2.1 |
| Cold Crushing Strength /MPa ≥ | 40 |
| Rupture Strength /MPa ≥ | 4 |
| Thermal Conductivity/W/ (m·K)1000ºC (Heating side) ≤ | 1.2 |
| Thermal Shock Resistance (1100ºC, water cooling) /cycle ≥ | 50 |
| Item | Normal Ascending Pipe Pre-cast Refractory | |
| ω(Al2O3) /% ≥ | 50 | |
| ω(MgO) /% ≥ | 2.5 | |
| Apparent Porosity /% ≤ | 28 | |
| Bulk Density /g/cm3 ≥ | 2.1 | |
| Cold Crushing Strength /MPa ≥ | 110ºC*24h After drying | 35 |
| 1350ºC*3h After firing | 40 | |
| Rupture Strength /MPa ≥ | 110ºC*24h After drying | 3.5 |
| 1350ºC*3h After firing | 4 | |
| Thermal Conductivity/W/ (m·K)1000ºC (Heating side) ≤ | 1.2 | |
| Thermal Shock Resistance (1100ºC, water cooling) /cycle ≥ | 50 | |
Company Profile
Henan Fireramo Industrial Co.,Ltd. is located in Songlou Industrial Zone, Xinmi City, Henan Province, China, which is one of the largest refractory base in China. The factory of us covers an area of 108,000 Square Meters with more than 1 billion RMB fixed assets. There are around 400 employees in our factory, including 20 board members, 10 technicians, and 4 plant managers. Fireramo is a new technology enterprise specializing in manufacturing, production, sales and consultant of refractory materials for various industry, such as, cement plants, glass factories, steel plants, chemical & oil industries.
Fireramo has been established since 1998. We do both domestic and overseas business. Our products have been sold all over the world, especially to Iran, Turkey, Pakistan, Korea, UAE, Saudi Arabia, Kuwait, Syria, Qatar, Russia, etc.
Factory Equipment
R&D
Fireramo has its own engineering technology center and testing laboratories, which can meet the testing requirements for various kinds of products and raw materials, and the research and development of new products. At the meanwhile, we have a well-equipped and skilled furnace construction team that can provide users with service items such as furnace design, construction, rapid maintenance and operation technical training, etc.
Capacity
Our factory has two high alumina brick and fireclay brick production lines, two silica brick production lines, two unshaped production lines and two lightweight brick production lines. The total production capacity reaches 148,000 tons, of which the annual output of high alumina clay brick production line is 50,000 tons, the annual output of silica brick production line is 60,000 tons, the annual output of lightweight production line is 18,000 tons, and the annual output of unshaped production line is 20,000 tons.
FAQ
Q1 : Do you provide free samples?
A1 : Yes, free samples can be provided, the buyer shall bear all the delivery cost.
Q2 : How can you control your quality?
A2 : We have professional QC system for the chemical composition and physical properties. All the products will be tested before delivery.
Q3 : What is your payments terms?
A3 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q4 : Are you a trading company or manufacturer?
A4 : We are a manufacture and our factory was established in 1998.
Q5 : What standards can you meet?
A5 : We can meet GB, ASTM, JIS, DIN standards. The third party test is acceptable.
){kind=link}