| Customization: | Available |
|---|---|
| Classification: | High-Alumina |
| Feature: | Good Mechanical Strength, Good Thermal Insulation Performance, High-Temperature Resistant, Low Thermal Conductivity, Long Time Materials |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ceramic Regenarator Balls
Product Introduction:
Regenerator ball is also called ball regenerator. It has such advantages as favorable Thermal shock stability, high thermal storage capability, high strength, easy to wash and reusable, etc. And it can apply to gas and non-gas fuel industrial furnace's regenerator fire system.
Product materials: mullite, adamantine spar, peraluminous
Product Highlights:
- Many little balls divide the stream into some small streams, when the stream flows through the regenerator, it can produce fierce turbulence and effectively burst through the boundary layer of the regenerator ball. Due to the small sphere diameter, small conduction radius, small heat resistance high-density, and good thermal conductivity, it can meet the requirement of the regenerative burner to turn quickly and frequently.
- The regenerator can swerve 20-30times/hour. And after the high temperature airstream flows through the regenerator bed, it drops its temperature to about 130ºC.
- When high temperature coal gas and the air flow through the same routes of the regenerator, it can preheat to the temperature just about 100ºC lower than the smoke respectively and the temperature efficiency can reach above 90%.
- Because the size of the regenerator is small, and the flow capacity of the ball bed is very strong,it will not affect heat transfer target even after sulphuric acid resistance increases.
- Regenerator ball has characteristics of antioxidants and slag resistance.
- The ceramic ball can be changed, washed easily, and can be reused.
Detail Photo:
Application:
Regenerator ball can apply to gas and non-gas fuel industrial furnace's regenerator fire system.
Technical Data:
| Item | PF-T65 | PF-T75 | PF-T85 |
| Al2O3 | 65 | 75 | 85 |
| Volume density(g/cm³) | 2.5 | 2.7 | 2.8 |
| Accumulation density(kg/m3) | 1550-1600 | 1600-1700 | 650-1750 |
| Specific surface area(m2/m3) | 200-220 | 200-220 | 200-220 |
| ≥Coefficient of thermal expansion (3)(x10-6/ºC) |
6.5 | 7 | 8 |
| Heat stability(11000ºCwater-cooled times) (11000ºC) |
30 | 30 | 20 |
| Resistance temperature (ºC) | 450 | 1650 | 1750 |
| Technical Parameters | ||||||
| Category | Feldspar |
Feldspar-Mullite |
Mullite |
Mullite-corundum |
Corundum | |
| Character | ||||||
| Chemical Composition(%) | Al2O3 | 20-30 | 30-45 | 45-70 | 70-90 | ≥90 |
| Al2O3+SiO2 | ≥90 | |||||
| Fe2O3 | ≤1 | |||||
| Water absorption(%) | ≤5 | |||||
| Acid resistance(%) | ≥98 | |||||
| Alkali degree(%) | ≥80 | ≥82 | ≥85 | ≥90 | ≥95 | |
| Resistance Temperature(ºC ) |
≥1300 | ≥1400 | ≥1500 | ≥1600 | ≥1700 | |
| Compressive Strength(N/piece) |
φ3 | ≥130 | ≥140 | ≥150 | ≥160 | ≥200 |
| φ6 | ≥400 | ≥420 | ≥440 | ≥480 | ≥500 | |
| φ8 | ≥480 | ≥520 | ≥600 | ≥620 | ≥650 | |
| φ10 | ≥600 | ≥700 | ≥800 | ≥900 | ≥1000 | |
| φ13 | ≥1000 | ≥1100 | ≥1300 | ≥1500 | ≥1800 | |
| φ16 | ≥1500 | ≥1600 | ≥1800 | ≥2300 | ≥2600 | |
| φ20 | ≥1800 | ≥2000 | ≥2300 | ≥2800 | ≥3200 | |
| φ25 | ≥2500 | ≥2800 | ≥3200 | ≥3600 | ≥4000 | |
| φ30 | ≥3000 | ≥3200 | ≥3500 | ≥4000 | ≥4500 | |
| Accumulation Weigh(y,kg/m2) | 1300-1400 | 1400-1500 | 1500-1600 | 1600-1800 | ≥1800 | |
Henan Fireramo Industrial Co.,Ltd. is located in Songlou Industrial Zone, Xinmi City, Henan Province, China, which is one of the largest refractory base in China. The factory of us covers an area of 108,000 Square Meters with more than 1 billion RMB fixed assets. There are around 400 employees in our factory, including 20 board members, 10 technicians, and 4 plant managers. Fireramo is a new technology enterprise specializing in manufacturing, production, sales and consultant of refractory materials for various industry, such as, cement plants, glass factories, steel plants, chemical & oil industries.
Fireramo has been established since 1998. We do both domestic and overseas business. Our products have been sold all over the world, especially to Iran, Turkey, Pakistan, Korea, UAE, Saudi Arabia, Kuwait, Syria, Qatar, Russia, etc.
Factory Equipment
R&D
Fireramo has its own engineering technology center and testing laboratories, which can meet the testing requirements for various kinds of products and raw materials, and the research and development of new products. At the meanwhile, we have a well-equipped and skilled furnace construction team that can provide users with service items such as furnace design, construction, rapid maintenance and operation technical training, etc.
Capacity
Our manufacturing company includes two high alumina brick and fireclay brick production lines, two silica brick production lines, two unshaped production lines and two lightweight brick production lines. The total production capacity reaches 148,000 tons, of which the annual output of high alumina clay brick production line is 50,000 tons, the annual output of silica brick production line is 60,000 tons, the annual output of lightweight production line is 18,000 tons, and the annual output of unshaped production line is 20,000 tons.
Q1 : Do you provide free samples?
A1 : Yes, free samples can be provided, the buyer shall bear all the delivery cost.
Q2 : How can you control your quality?
A2 : We have professional QC system for the chemical composition and physical properties. All the products will be tested before delivery.
Q3 : What is your payments terms?
A3 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q4 : Are you a trading company or manufacturer?
A4 : We are a manufacture and our factory was established in 1998.
Q5 : What standards can you meet?
A5 : We can meet GB, ASTM, JIS, DIN standards. The third party test is acceptable.
){kind=link}